2005 STS license plate bulbs

Wiring, DIY, lighting, etc.
Post Reply
kevm14
Posts: 15200
Joined: Wed Oct 23, 2013 10:28 pm

2005 STS license plate bulbs

Post by kevm14 »

Oops, noticed the right one was burnt out. I almost just ignored it knowing I just got through inspection. But then common sense dawned on me - last thing I need is a reason to get pulled over which could result in a fix it ticket for the tint, right?

Happily, this is 100x easier than the SRX. No, you still don't do it from the outside. But it's not bad at all. You just remove all the push pins that hold the carpet/pad thing up to the inside of the trunk. Remove that and the bulbs are right there.
WP_20170716_13_30_19_Pro.jpg
WP_20170716_13_30_23_Pro.jpg
WP_20170716_13_30_31_Pro.jpg
WP_20170716_13_35_33_Pro.jpg
I even did both bulbs. It takes regular 194s.
Post Reply