Antenna repair

Roofs, chimneys, siding
Post Reply
kevm14
Posts: 15200
Joined: Wed Oct 23, 2013 10:28 pm

Antenna repair

Post by kevm14 »

The antenna and mast actually were fine. Recall this
http://forums.kevinallenmoore.com/viewt ... 1607#p7693

Turns out the brackets bent - pretty severely, too.
WP_20160220_14_17_09_Pro.jpg
WP_20160220_14_17_15_Pro.jpg
WP_20160220_14_17_29_Pro.jpg
This is what I ordered originally and I don't recommend them due to the thin gauge construction:
http://www.solidsignal.com/pview.asp?p=SKY6027

I remembered that the ones Ed ordered were built much better, so I ordered that one to replace mine:
http://www.solidsignal.com/pview.asp?p=RON1218

They present a little more of a challenge when it comes time to install the mast, but it is worth it. It helped to separate the masts and install the lower mast into the brackets by itself, then attach the upper mast w/ antenna after that. I was able to clamp the bands way tighter than the other kit and the brackets aren't even bent. Like night and day.
WP_20160220_16_26_13_Pro.jpg
WP_20160220_16_26_38_Pro.jpg
Only one real hitch: the lower bracket was mounted in such a way that the band was actually touching the roof. That's not good, so we came up with a solution:
WP_20160220_16_26_46_Pro.jpg
WP_20160220_16_26_58_Pro.jpg
Even serves as a cable guide!

We did a little aiming experiment but it didn't amount to much difference, though we didn't try drastically different angles than before.
Post Reply