01 BMW 325 Ci Center Console Armrest Replacement

Fuzzy dice or LED bulbs are not a repair
Post Reply
Adam
Posts: 2240
Joined: Wed Oct 23, 2013 9:50 pm

01 BMW 325 Ci Center Console Armrest Replacement

Post by Adam »

The plastic broke, because of course it did. Fortunately China has replacement covers available for ~$25 so I ordered one. It's even "leather"!

Here's the stock one. The cover material has actually held up well, but the structure didn't. You can see the broken ears at the rear of the console.
20210819_103136.jpg
Here's the cover out of the way (since it it broken off).
20210819_103154.jpg
First, remove the ash tray, that exposes a couple screws in the housing.
20210819_103324.jpg
Once you get those out, you can then remove more screws that hold the rear structure together to you can access the hinges.
20210819_103147_HDR.jpg
Here's the hinge. It's a fancy coiled spring.
20210819_103441.jpg
You pop the center wire out of the slot, then you can pull the spring off.
20210819_104102_HDR.jpg
20210819_103815_HDR.jpg
The center section then pulls out from both sides. I could then remove the rest of the broken plastic.
20210819_103648_HDR.jpg
The new one slides right on. Notice the fancy "leather" stitching.
20210819_103743_HDR.jpg
Assembly is reverse of removal
20210819_104641.jpg
Notice the color difference. The new one doesn't have the 'soft touch' rubberized coating the factory plastic has. My rear passengers will be very disappointed. There's also a crease/dent that probably happened during shipping. I'm sure that will be fine.
20210819_104809.jpg
Here's some closeups of broken stuff.
20210819_104630.jpg
20210819_105047.jpg
20210819_105036_HDR.jpg
Post Reply