Pellet Stove - Computer/Controller Board
Posted: Sun Jan 12, 2014 8:47 pm
So when replacing the combustion blower (that will be in another post...) on my pellet stove I scraped the electrical components on the controller board when sliding the stove back in place.
Here is how to replace the controller board:
Step 1: Unscrew the 4 screws that hold the controller board in place. They are on the front of the panel at the 4 corners. Step 2: Remove the wiring harness from the board. Step 3: Connect the wiring harness to the new panel, and secure the new panel with the 4 screws from the old controller. Step 4: Make sure there is enough clearance between the fireplace bricks and the controller panel in the future. I would also recommend making a cover to protect the back of the controller.
Here is how to replace the controller board:
Step 1: Unscrew the 4 screws that hold the controller board in place. They are on the front of the panel at the 4 corners. Step 2: Remove the wiring harness from the board. Step 3: Connect the wiring harness to the new panel, and secure the new panel with the 4 screws from the old controller. Step 4: Make sure there is enough clearance between the fireplace bricks and the controller panel in the future. I would also recommend making a cover to protect the back of the controller.