Repair-It

I don't know where this went or how long it was missing, or if it was ever on my car while I've owned it...

But something is missing at the bottom center of the front bumper.

I think it's 207 or 208 on the diagram.

Currently

When I first got it
Yup that bottom trim piece somehow fell off.

I think it's A2128854674

https://www.mercedesbenzpartsshop.com/o ... 2128854674

Well that's expensive.

kevm14 wrote: ↑Sat Mar 29, 2025 6:48 am I don't know where this went or how long it was missing, or if it was ever on my car while I've owned it...

But something is missing at the bottom center of the front bumper.

I think it's 207 or 208 on the diagram.

I think I need part 213 to more securely attach...

But it is snapped into place and seems secure on the second try.

I was able to jam this in through the lower grill. I am still not sure if this is right. The dealer sold me some metal pop rivets that fit various things in the front bumper but I feel the plastic push rivet is more correct. Next time I have the car in the air I'll try to remember to remove the front underbody cover to see if there are exposed areas to insert a couple more.

Since I had the car up for the struts I took a closer look at this. The holes I remembered in the trim were WAY too small for any push pin and more importantly, were not surrounded by any support that you would insert anything through to capture it. Could be used for manufacturing perhaps. But I did find two areas to add push pins to, so I did that. Going to need 2 push pins for the front splash guard area, as shown in the last two photos. The ones I had did not fit.