2014 E63 brake job
Posted: Mon Apr 21, 2025 5:53 am
I have made quite a few posts postulating about brakes. I was considering doing brakes at the same time as the front struts but I might just try to milk these pads/rotors a bit longer. It's not REALLY a while you're in there job. Car is up, wheels are off I guess but aside from that, no.
So I'll at least make a list of stuff to order or consider ordering and pick this up some other time.
Part of this job I will be upgrading the front two piece 360mm rotors to two piece 390mm. Two piece adds hundreds each.
Rotors x 2: https://www.rockauto.com/en/moreinfo.ph ... abPSfh32M9
Longer Porsche caliper bolts x 2: https://www.sunsetporscheparts.com/oem- ... a700758500
I already have the 15mm machined spacers in a box.
Would need to make sure I have brake fluid because it's due for a flush.
And the final item is choosing a pad. Really would be nice if I could get something that matches front to rear. Previously I was considering trying the Hawk HPS 5.0. Nothing crazy as it is a street car. Pads and calipers are already compatible with the 390mm rotors as the spacers just move everything outboard by 15mm.
So I'll at least make a list of stuff to order or consider ordering and pick this up some other time.
Part of this job I will be upgrading the front two piece 360mm rotors to two piece 390mm. Two piece adds hundreds each.
Rotors x 2: https://www.rockauto.com/en/moreinfo.ph ... abPSfh32M9
Longer Porsche caliper bolts x 2: https://www.sunsetporscheparts.com/oem- ... a700758500
I already have the 15mm machined spacers in a box.
Would need to make sure I have brake fluid because it's due for a flush.
And the final item is choosing a pad. Really would be nice if I could get something that matches front to rear. Previously I was considering trying the Hawk HPS 5.0. Nothing crazy as it is a street car. Pads and calipers are already compatible with the 390mm rotors as the spacers just move everything outboard by 15mm.