The antenna and mast actually were fine. Recall this
http://forums.kevinallenmoore.com/viewt ... 1607#p7693
Turns out the brackets bent - pretty severely, too.
This is what I ordered originally and I don't recommend them due to the thin gauge construction:
http://www.solidsignal.com/pview.asp?p=SKY6027
I remembered that the ones Ed ordered were built much better, so I ordered that one to replace mine:
http://www.solidsignal.com/pview.asp?p=RON1218
They present a little more of a challenge when it comes time to install the mast, but it is worth it. It helped to separate the masts and install the lower mast into the brackets by itself, then attach the upper mast w/ antenna after that. I was able to clamp the bands way tighter than the other kit and the brackets aren't even bent. Like night and day.
Only one real hitch: the lower bracket was mounted in such a way that the band was actually touching the roof. That's not good, so we came up with a solution:
Even serves as a cable guide!
We did a little aiming experiment but it didn't amount to much difference, though we didn't try drastically different angles than before.
Antenna repair
Antenna repair
You do not have the required permissions to view the files attached to this post.