Colorado/Canyon diesel

Car/truck/automotive news and discussion
Post Reply
kevm14
Posts: 15688
Joined: Wed Oct 23, 2013 10:28 pm

Colorado/Canyon diesel

Post by kevm14 »

http://blog.caranddriver.com/over-30-th ... on-diesel/

I would expect over 30 highway. The question is, how much more? And what economy in mixed driving? This could be an interesting choice for folks. Although, the large trucks never seem to have a problem selling when gas prices are low, so people clearly have figured out how to drive/park them.
Bob
Posts: 2469
Joined: Thu Dec 19, 2013 7:36 am

Re: Colorado/Canyon diesel

Post by Bob »

Looks promising. I think fewer people are daily driving big trucks now, which helps to reduce the MPG pains. If diesel was equal in cost to regular, these would probably sell very well. In the end, it may end up like the Cruze diesel.
kevm14
Posts: 15688
Joined: Wed Oct 23, 2013 10:28 pm

Re: Colorado/Canyon diesel

Post by kevm14 »

A little more info I guess.

http://autoweek.com/article/car-news/oi ... act-trucks
this truck-specific, 2.8-liter turbodiesel four generates 181 hp at 3,400 rpm, and 369 lb-ft of torque at 2,000. At least 330 lb-ft are available between 1,400 and 2,900 rpm.
How far has mainstream automotive technology come in 30 years? The last diesel offered in a small U.S. Chevy truck—the 1985 S-10—was built by Isuzu. At 2.2 liters, it made 62 hp and 96 lb-ft. The contemporary Ford Ranger offered a diesel through 1987. That was a 2.3-liter turbo from Mitsubishi, and it generated 86 hp and a whopping 134 lb-ft.
The stand-out bit of tech in the 2.8-liter Duramax might be its liquid-cooled, variable-geometry turbocharger, with a little electric motor that varies the diameter of the impellor. Once reserved for Freightliners and Porsche 911 Turbos, VGTs operate with minimal lag in single-turbo applications. They have a low boost threshold and are particularly efficient at higher engine speeds. In the 2.8L Duramax, the VGT generates up to 40 PSI of boost, but requires no waste gate.
The 2.8-liter Duramax was developed by GM Powertrain in Pontiac, Michigan, and Rüsselsheim, Germany. The basic design has been in production since 2011, primarily for small pickups sold in Southeast Asia and South America. Application in North America prompted another round of development and a second generation, focused on adaptation for climate extremes and better NVH control.
Interesting. So that partly answers some questions people have like "OEM XYZ has ABC diesel already in their portfolio! Why don't they bring it here?". Well, aside from emissions, this says climate extremes and refinement. That sounds reasonable.
GM’s Hydramatic 6L50 automatic, the only transmission offered with the 2.8-liter Duramax, is also equipped with something GM Powertrain calls CPA--for centrifugal pendulum absorber. CPA is essentially an electronically managed, spring-actuated clutch in the torque convertor. It closes or releases in milliseconds to counter-balance quick variations in torque and minimize lash through the transmission, driveshaft and rear end.
Geez, they really wanted to quell vibes. Also, 6L50! I have one of those in an SRX...

Anyway, GM is expecting a 10% take rate so that'll be interesting to see play out.
Bob
Posts: 2469
Joined: Thu Dec 19, 2013 7:36 am

Re: Colorado/Canyon diesel

Post by Bob »

I think the take rate could end up being higher if diesel prices stay as close to regular as they have been lately. I don't think this is expected, but it could be a game changer for diesel adoption rates.
kevm14
Posts: 15688
Joined: Wed Oct 23, 2013 10:28 pm

Re: Colorado/Canyon diesel

Post by kevm14 »

Post Reply